Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's completely new Chatterfree carbide endmill. The cutters' variable-pitch flute pattern annihilates harmonic vibration, the primary source of chatter. This facilitates faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling. In addition, end users also report prolonged edge life due to reduced chatter. The chatter-free function is attainable in both solid carbide endmills and tips in Iscar's MULTI-MASTER replaceable-tip line. Diameter range is 6 to 20mm for the solid carbide endmills, and 8 to 20mm for MULTI-MASTER tips. These new endmills are excellent for reduced power machines with ISO40 or BT40 adaptations. The solid carbide variant can deal with full slot machining up to 2xD. Depth capability on the replaceable-tip construction is more restrained since the active length is shorter. In full slotting operations on alloy steel, the solid carbide variant conveniently handles 0.03-0.05 feed rates at 180-220mm/min surface speed and 2xD depth of cut.

FINISHRED - Revolutionary Solid Carbide Endmills

Iscar is introducing the EFR.. B44 and the MM EFS.. Finishred a unprecedented solid carbide endmill family. The Finishred carbide endmill is a blending of both roughing and finishing endmills in a single tool. Roughing endmills remove material from work pieces more swiftly and proficiently than traditional endmills. Nonetheless, roughing endmills leave grooves on the machined surface. Hence, after using a roughing endmill, a finishing endmill must to be used in order to obtain a smooth surface finish. This means time-consuming tool change, setup time and necessity of maintaining two endmill types in the inventory.

Features of the Finishred Endmills:

The EFR.. B44 and the MM EFS.. endmills feature four flutes with 45 degree helix, 2 serrated flutes and 2 continuous flutes.

The cutting edges of the finishing flutes are radially farther from the tool axis than the cutting edges of the serrated flutes. The finishing flutes eliminate the grooves caused by the roughing flutes, leaving a fine surface finish.

The tool is fully effective and enables running at rough machining parameters, resulting in finish surface quality.

The distinctive tool design lessens vibration at high load applications.

The tool creates short and long chips concurrently. This chip mixture is evacuated more successfully than each individual chip type, an exceptional solution in slotting and cavity milling applications.

The Finishred is also offered with the Multi-Master indexable milling head option which couples the Finishred features with the advantage of little setup time, no regrinding costs and the extensive range of shank and extension choices are available for the Multi-Master milling heads.

A single tool substitutes the roughing and finishing endmills; therefore decreasing stock.

Tool change and setup time can be eradicated.

An extra tool position is acquired on the machine

New Chip Splitting Solid Carbide Endmills for Elevated Metal Removal Rates

ISCAR is establishing the ECP-3/4L family of chip splitting endmills. The new endmills are available with three and 4 38 degree flutes in grade IC900. They feature 2xD and long shanks with scaled down neck diameter, which facilitate machining along high shoulders, at high feeds. These endmills, due to their chip splitting capability and force distribution can be used very efficiently on reduced power machines (CAT40/BT40/ISO40). The serrated cutting edge includes flat peaks which leave a better surface finish, in comparison to the current rougher carbide endmill. The ECP endmills are recommended for machining austenitic and martensitic stainless steel, at up to 2xD depth of cut. They can be used on alloyed steel as well. All of the introductory tests conducted at several customers' locations showed outstanding results.

Iscar Adds Their Most Recent Innovations To A Long Line Of Prospering Hole Making Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.

Iscar Announces A Completely New Line Of Slitting Cutters Using Tang-Grip Technology And The Sturdiness Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.

Iscar Recently Releases Numerous Original Lines To Continue Their Family Of Milling Tools
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.

Push Pull Testing For Building Industry Supplying Calibrated Measuring Instruments. Mechanical Load Testing Procedures For On Site Proof To Testing Standards.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.

Brand New Cutters And Carbide Insert Arrangements From Iscar To Better Enhance The Machining Method
Iscar is introducing Penta 34 carbide inserts with a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.

New End Mills By Iscar Can Increase Productivity While Reducing Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Industrial Water Heater - Considering All Of Your Needs - Study With Care In Order To Know More
Looking into a commercial water heater? Then you have a few things that you must consider. Take a look at these areas to avoid making a mistake with the wrong unit.

Commercial Water Heater- Which Is Perfect For Your Requirements
If you are in the market for a commercial water heater then consider what the needed application is and your overall cost to determine which is best for you. Since there are so many to choose from you may have to do some calculating in order to match the need.

Related Articles

• Push Pull Testing For Building Industry Supplying Calibrated Measuring Instruments. Mechanical Load Testing Procedures For On Site Proof To Testing Standards.
• A Few Of Advancements In Carbide Inserts From Iscar Over The Years
• Brand New Cutters And Carbide Insert Arrangements From Iscar To Better Enhance The Machining Method
• New End Mills By Iscar Can Increase Productivity While Reducing Costs
• A Handful Of Developments In Carbide Inserts From Iscar Over The Past Decade
• The Newest In Carbide Endmill Configuration In A Extensive And Effective Family From Iscar
• The Most Recent In Carbide Endmill Designs In A Extended And Productive Line From Iscar
• The Most Recent In Carbide Endmill Architectures In A Extended And Productive Line From Iscar
• Brand New End Mills By Iscar Will Expand Productivity While Decreasing Costs
• Completely New End Mills From Iscar Can Increase Productivity While Reducing Costs
• Push Pull Testing For Construction Industry With Calibrated Measuring Instruments. Mechanical Load Testing Procedures For On Site Documentation To Testing Standards.

Resources

• Engineer Companies
• Real Russian Ladies